Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta 300rr
Part: Engine oil

This guide describes how to replace the engine oil on a Beta 300 RR. Obtain 1 litre of Motul 7100 SAE 10W40 oil and a magnetic drain plug with O-ring Beta 006081528000. Position the motorcycle on the side stand. Start the engine, let it reach temperature, and turn it off. Using a ratchet and a 4 mm Allen socket, unscrew the two screws of the skid plate. Place a container for used oil disposal under the engine. Open the oil filler cap. Unscrew the engine oil drain plug located at the bottom right side of the engine using a 13 mm spanner. Allow the oil to drain. Refit the new oil drain plug and the skid plate. Unscrew the 8 mm breather plug located to the right of the Beta logo on the casing. Pour in the oil from the filler and close the breather plug. Start the engine for about 10 seconds and turn it off. Unscrew the breather plug again and let a few drops of oil escape, then refit it.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Beta 300RR?
How to Change the Engine Oil on a Beta 300RR?
300rr To change the engine oil on your Beta 300RR, first ensure the engine is cold. Position the bike on a flat and stable surface. Remove the oil cap on t…
Replacing Engine Oil in a Beta 300 RR
Replacing Engine Oil in a Beta 300 RR
300rr Today, you will learn how to replace the engine oil in a Beta 300 RR two-stroke, performing the regular service (oil filter and air filter replacemen…
How do you replace the rear wheel bearing of the Beta 300RR?
How do you replace the rear wheel bearing of the Beta 300RR?
300rr In order to replace the rear wheel bearing of the Beta RR 300, you need to loosen the nut that secures the central axle of the rear wheel of the moto…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos