Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta 300rr
Part: Engine oil

Today, you will learn how to replace the engine oil in a Beta 300 RR two-stroke, performing the regular service (oil filter and air filter replacement not shown in this video). First, start the engine for a couple of minutes; then turn it off and remove the oil drain bolt using a socket spanner, allowing the oil to drain into a container. Wait about ten minutes before replacing the bolt, then pour the new engine oil into the designated upper hole, filling to the correct level (approximately 850 grams of oil will be needed).

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

300rr This guide describes how to replace the engine oil on a Beta 300 RR. Obtain 1 litre of Motul 7100 SAE 10W40 oil and a magnetic drain plug with O-ring…
300rr In order to replace the rear wheel bearing of the Beta RR 300, you need to loosen the nut that secures the central axle of the rear wheel of the moto…
300rr You can easily find the key switch on the most popular websites. Place a metal bracket under the speedometer. Disconnect the fuel line and unscrew th…

How to Replace the Fork Seal on a Malaguti XSM 125?

To replace the fork seal on a Malaguti XSM 125, loosen the bolts that secure the fork to its housing: these screws will be located at the top of the fork, just below the handlebars, and at the bottom near the wheel. Once all the bolts are loosened, you can free the wheel from its housing, allowing the fork to be detached as well: the seal at the top can be removed using a tool, so it can be replaced with a new one.

Watch the video!


by ScegliAuto

More videos