|
Do it yourself
| |||
| ||||
To remove the rear wheel of the Beta Alp, you need to open the chain at one point by removing the appropriate pin that holds two links together: once the chain is opened and removed, proceed by loosening the bolts that secure the rear brake caliper to the corresponding disc. After detaching the caliper, you can loosen the nuts that secure the wheel's central axle: this should now be slid out from the swingarm, removing the wheel in the process. You can then replace it by securing it again with the pin and remounting the chain and brake.
Posted on 18 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Alp
To install the luggage rack on the Beta Alp, you need to unscrew the bolts securing the rear mudguard of the bike, located at the bottom of it. Once …
Alp
To ensure that the muffler of the Beta Alp is replaced, you will need to loosen the screws that fix the exhaust terminal to its housing: these screws…
Alp
To replace the exhaust pipe of the Beta Alp, you need to loosen the screws that fix the component to its housing, on the right side of the fender of …
|
How to Replace the Brake Lever of the Honda SH 125i?
To replace the brake lever of the Honda SH 125i, access the nut located at the bottom of the lever, where it is fixed to the handlebar. This nut needs to be loosened to remove the bolt it is attached to: by removing this bolt, you will be able to free the lever and remove it completely. Once the old lever is removed, insert the new one, securing it in place by inserting the bolt and the corresponding nut; then check that the brake functions correctly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.717
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
