Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing the Key Switch on Beta 300 RR

Model: Beta 300rr
Part: Key

Video tutorial

You can easily find the key switch on the most popular websites. Place a metal bracket under the speedometer.

Disconnect the fuel line and unscrew the two screws on the front sides, above the radiator, and the two at the front and back of the tank. Remove the plastic at this point, and connect the power cable (if you don’t know which it is, watch the video) to the switch you purchased, and connect the other cable from the switch to the coil, using spade connectors.

Reassemble everything and check that the electrical connection works.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Replacing Engine Oil in a Beta 300 RR
Replacing Engine Oil in a Beta 300 RR
300rr Today, you will learn how to replace the engine oil in a Beta 300 RR two-stroke, performing the regular service (oil filter and air filter replacemen…
Engine Oil and Drain Plug Replacement for Beta 300 RR
Engine Oil and Drain Plug Replacement for Beta 300 RR
300rr This guide describes how to replace the engine oil on a Beta 300 RR. Obtain 1 litre of Motul 7100 SAE 10W40 oil and a magnetic drain plug with O-ring…
How to replace the rear wheel bearing on the Beta 300RR?
How to replace the rear wheel bearing on the Beta 300RR?
300rr To replace the rear wheel bearing on the Beta 300RR, loosen the nut that secures the central axle of the rear wheel so that it can be removed from it…

How to Reset the Oil Service on the Honda SH Mode 125 Scooter?

In this tutorial, you will see how to reset the oil service on the Honda SH Mode 125 scooter, a very simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by inserting the key but keep it in the initial position, then press and hold the "SET" button located at the bottom right of the dashboard, and simultaneously turn on the instrument panel. At this point, hold the button for about 3 seconds, or for as long as necessary for the service to reset correctly.

Watch the video!


by ScegliAuto

More videos