Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw S1000 Xr
Part:

Today's instructions will show us how to lubricate the transmission chain of the BMW S1000 XR, in simple steps. First, we put the motorcycle on the center stand and start cleaning the chain with a brush and white petrol, cleaning every part of the chain; the end result should give a shiny chain free of any dirt residue, as shown in the video. At this point, we lubricate the transmission chain, spraying light grease spray and lubricating all points of the chain, following the video tutorial to the end!

Posted on 13 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Wheel of the BMW S1000 XR
Removing the Rear Wheel of the BMW S1000 XR
S1000 Xr This guide shows how to remove and replace the rear wheel or tyre of the BMW S1000 XR motorcycle. First, place the bike on the centre stand and begin…
How do you reset the Service light on the BMW S1000 XR?
How do you reset the Service light on the BMW S1000 XR?
S1000 Xr It will be possible to reset the Service light of the BMW S1000 XR by connecting a diagnostic tool to the OBD port of the vehicle: this port will be …
How to Reset the Service Light on the BMW S1000 XR
How to Reset the Service Light on the BMW S1000 XR
S1000 Xr To reset the Service light on the BMW S1000 XR, connect a diagnostic tool to the vehicle's OBD port: this port is located underneath the seat of the …

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos