Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 7
    4. : Spark plugs

BMW Serie 7 - Spark plugs

Spark Plugs BMW Serie 7 (1994-2001 / mk 3, e 38)

BMW Serie 7 (1994-2001 / MK 3, E38)
Ignition Coil Removal Instructions
The ignition coils are integrated with the spark plug boots. To remove them, first take off the plastic cover on top of the engine (just press on the clips to …Read all…
Posted on 27 February 2026 by ScegliAuto
Airbag (5) Speaker (3) Air conditioning (1) Car stereo (5) Battery (3) Air vents (1) Bushings (2) Control arm (4) Spark plugs (1) Body (5) Control unit (1) Key (9) Timing belt (1) V-belt (1) A/C controls (1) Onboard computer (1) Checks and maintenance (4) Dashboard (10) Brake rotors (2) Headlight (3) Air filter (1) Cabin air filter (4) Oil filter (1) Clutch (1) Grille (2) Accessory kit (4) Light bulb (1) Side marker bulb (1) Antifreeze coolant (1) Handle (5) Exhaust muffler (1) Engine (4) Power window motor (1) Starter motor (1) Engine oil (1) Clock (1) Door trim panel (3) Front bumper (3) Rear bumper (2) Tires (1) Pump (1) Fuel pump (1) Car door (1) Push button (1) Radiator (1) Fuse box (17) Seat (2) Parking sensors (1) Oxygen sensor (1) Side mirror (3) Warning light – error code (15) (4) Service warning light (9) Brake drums and shoes (1) Fuel cap (2) Drivetrain (1) Center console tunnel (2) Valve (1) Blower motor (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos