Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 7
    4. : Speaker

BMW Serie 7 - Speaker

Speaker BMW Serie 7 (2001-2008 / e 68, mk 4, e 65, e 67, e 66)

BMW Serie 7 (2001-2008 / E68, MK 4, E65, E67, E66)
How to Remove the Interior Speakers of the BMW 7 Series
In this guide, you will find instructions to remove and replace the speakers located under the seat of the BMW 7 Series. First, get inside the vehicle and …Read all…
Posted on 19 October 2026 by ScegliAuto
BMW Serie 7 (2001-2008 / E68, MK 4, E65, E67, E66)
Removing the Rear Speaker
To remove the rear speaker, first take off the door panel. Start by removing the two square plugs located below the wood trim covering the armrest area of the …Read all…
Posted on 1 March 2026 by ScegliAuto
BMW Serie 7 (2001-2008 / E68, MK 4, E65, E67, E66)
Replacing Car Speakers
The following guide is for replacing the speakers in your car. The first step is to remove the grilles in front of the speakers. Then, using a screwdriver, …Read all…
Posted on 22 February 2026 by ScegliAuto
Airbag (5) Speaker (3) Air conditioning (1) Car stereo (5) Battery (3) Air vents (1) Bushings (2) Control arm (4) Spark plugs (1) Body (5) Control unit (1) Key (9) Timing belt (1) V-belt (1) A/C controls (1) Onboard computer (1) Checks and maintenance (4) Dashboard (10) Brake rotors (2) Headlight (3) Air filter (1) Cabin air filter (4) Oil filter (1) Clutch (1) Grille (2) Accessory kit (4) Light bulb (1) Side marker bulb (1) Antifreeze coolant (1) Handle (5) Exhaust muffler (1) Engine (4) Power window motor (1) Starter motor (1) Engine oil (1) Clock (1) Door trim panel (3) Front bumper (3) Rear bumper (2) Tires (1) Pump (1) Fuel pump (1) Car door (1) Push button (1) Radiator (1) Fuse box (17) Seat (2) Parking sensors (1) Oxygen sensor (1) Side mirror (3) Warning light – error code (15) Tire pressure warning light (4) Service warning light (10) Brake drums and shoes (1) Fuel cap (2) Drivetrain (1) Center console tunnel (2) Valve (1) Blower motor (2)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos