Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

BMW Serie 7 - Arm

BMW Serie 7 (1994-2001 / E38, MK 3)
Bmw 7 Series rear control arm removal and replacement
To remove and replace the rear control arm, proceed as follows: 1) Raise the vehicle from the ground using a jack or lifters. 2) Remove the rear wheel on the …read all…
Posted on 22 September 2023 by ScegliAuto
BMW Serie 7 (2001-2008 / E65, E66, E68, MK 4, E67)
Replacement front arms
Remove the bolts of the wheel involved in the machining and therefore also the wheel, now you will have to unscrew the bolt that blocks the part of the arm on …read all…
Posted on 21 September 2023 by ScegliAuto
BMW Serie 7 (1994-2001 / E38, MK 3)
How should the suspension arm of the car be replaced
The suspension arm of your car ensures the junction between the frame and the uprights. If it is deformed or worn, however, it must be replaced because it …read all…
Posted on 8 September 2023 by ScegliAuto
BMW Serie 7 (2001-2008 / E65, E66, E68, MK 4, E67)
Replacement of the front suspension arm
To replace the suspension arm, start by lifting the car and removing the front wheel; then unscrew the fixing nut of the silky head of the arm applied to the …read all…
Posted on 6 September 2023 by ScegliAuto
Airbags (6) Loudspeaker (2) Air conditioning (1) Car stereo (5) Battery (5) Air Vents (1) Bushings (2) Arm (4) Spark plugs (1) Bodywork (4) Control unit (2) Key (4) Timing belt (1) V-belt (1) Air conditioning controls (1) -board computer (6) Checks and maintenance (10) Dashboard (9) Brake discs (2) Headlight (3) Cabin air filter (4) Oil filter (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Antifreeze liquid (1) Handle (4) Muffler (1) Engine (4) Window motor (1) Starter motor (1) Engine oil (1) Door panel (3) Front bumper (3) Rear bumper (2) Brake pads (1) Tires (1) Pump (1) Fuel pump (1) Door (1) Push button (1) Instrument cluster (2) Radiator (1) Fuse box (9) Seat (2) Parking sensors (1) Brake system (1) Lambda sensor (1) Outside rearview mirror (1) Manufacturer's coat of arms (1) Drums and shoes (1) Transmission (1) Central tunnel (2) Valve (2) Interior blower (2)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos