Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 7
    4. : Rear bumper

BMW Serie 7 - Rear bumper

Rear Bumper BMW Serie 7 (1994-2001 / mk 3, e 38)

BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38)
How to Remove the Rear Bumper on a BMW 7 Series?
In this tutorial, you will see how to remove the rear bumper on a BMW 7 Series E38, a very simple operation. Start by removing the bolt located inside the …Read all…
Posted on 15 July 2026 by ScegliAuto
BMW Serie 7 (1994-2001 / MK 3, E38)
Instructions for Removing the Rear Bumper
To remove the rear bumper, first remove the taillights: then take off the trim located under the lower edge of the lights (it is secured with pressure clips) …Read all…
Posted on 20 February 2026 by ScegliAuto

Rear Bumper BMW Serie 7 (1986-1994 / mk 2, mk 3, e 32, e 38)

BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38)
How to Remove the Rear Bumper on a BMW 7 Series?
In this tutorial, you will see how to remove the rear bumper on a BMW 7 Series E38, a very simple operation. Start by removing the bolt located inside the …Read all…
Posted on 15 July 2026 by ScegliAuto
BMW Serie 7 (1994-2001 / MK 3, E38)
Instructions for Removing the Rear Bumper
To remove the rear bumper, first remove the taillights: then take off the trim located under the lower edge of the lights (it is secured with pressure clips) …Read all…
Posted on 20 February 2026 by ScegliAuto
Airbag (5) Speaker (3) Air conditioning (1) Car stereo (5) Battery (3) Air vents (1) Bushings (2) Control arm (4) Spark plugs (1) Body (5) Control unit (1) Key (9) Timing belt (1) V-belt (1) A/C controls (1) Onboard computer (1) Checks and maintenance (4) Dashboard (10) Brake rotors (2) Headlight (3) Air filter (1) Cabin air filter (4) Oil filter (1) Clutch (1) Grille (2) Accessory kit (4) Light bulb (1) Side marker bulb (1) Antifreeze coolant (1) Handle (5) Exhaust muffler (1) Engine (4) Power window motor (1) Starter motor (1) Engine oil (1) Clock (1) Door trim panel (3) Front bumper (3) Rear bumper (2) Tires (1) Pump (1) Fuel pump (1) Car door (1) Push button (1) Radiator (1) Fuse box (17) Seat (2) Parking sensors (1) Oxygen sensor (1) Side mirror (3) Warning light – error code (15) (4) Service warning light (9) Brake drums and shoes (1) Fuel cap (2) Drivetrain (1) Center console tunnel (2) Valve (1) Blower motor (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos