Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 7
    4. : Replacement front arms

BMW Serie 7 - Video tutorial

Model: BMW Serie 7 MK 4, E68, E65, E67, E66 - Years 2001-2008
Part: Arm
Operation: Replacement front arms

Remove the bolts of the wheel involved in the machining and therefore also the wheel, now you will have to unscrew the bolt that blocks the part of the arm on the wheel hub, now proceed to remove the bolt located in the middle of the arm and consequently also the bolt located at the other end of the arm. Now you can, by transporting the arm and taking advantage of the games present, remove the arm to install the new one, paying attention to the direction in which you go to reassemble it. Then go through the same steps on the other side and go through the steps described backwards for reassembly.


Posted on 21 September 2023 by ScegliAuto



Replacement bushings automobile
BMW Serie 7 (1994-2001 / MK 3, E38) If the bushings of your car are worn they must be replaced, as well as the arms, suspensions, shock absorbers, connecting rods, etc. They can be repl
Replacement front indicator light
BMW Serie 7 (1994-2001 / MK 3, E38) The replacement of the front indicator light, the one next to the light, is simple to perform since it does not require the disassembly of any other
Replacement discs and front pads
BMW Serie 7 (1994-2001 / MK 3, E38) The replacement of the brake discs and pads on this car model is simple to perform as the pads are fixed to the caliper with pins, which makes their

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos