Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Speaker

Model: BMW Serie 7 E68, MK 4, E65, E67, E66 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Speaker

See other generations:
Video tutorial

To remove the rear speaker, first take off the door panel. Start by removing the two square plugs located below the wood trim covering the armrest area of the panel, and then the circular plug found inside the handle opening.

Next, unscrew the screws underneath to remove the handle along with its trim. At this point, you can complete the removal of the door panel by disengaging the retaining clips along the edges to access the speaker.

Remove the speaker by unscrewing the mounting screws and disconnecting the connector.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How to Remove the Interior Speakers of the BMW 7 Series
How to Remove the Interior Speakers of the BMW 7 Series
BMW Serie 7 (2001-2008 / E68, MK 4, E65, E67, E66) In this guide, you will find instructions to remove and replace the speakers located under the seat of the BMW 7 Series. First, get inside the vehicl…
Instructions for Removing the Car Radio Tuner
Instructions for Removing the Car Radio Tuner
BMW Serie 7 (2001-2008 / E68, MK 4, E65, E67, E66) The AM FM tuner of the car radio in this vehicle is located inside the rear window pillar shell: to remove it, proceed as follows. Start by removing …
Removing the Rear Door Panel
Removing the Rear Door Panel
BMW Serie 7 (2001-2008 / E68, MK 4, E65, E67, E66) To remove the rear door panel, first locate the corresponding fastening screws: along the strip covering the central armrest support on the panel, th…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos