Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio Tuner

Model: BMW Serie 7 E66, E67, E68, E65, MK 4 - Years 2001-2008
Part: Car stereo

The AM FM tuner of the car radio in this vehicle is located inside the rear window pillar shell: to remove it, proceed as follows. Start by removing the rear seat cushion by pulling it upward, then remove the mounting pins of the rear seatback brackets to take it out; detach the trim of the inner sill and the plastic cover of the rear fender; then move to the trim of the rear window pillar: remove the cap with the AIRBAG label under which there is the mounting screw; complete the removal of the trim and then take out the tuner.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Car Radio Removal Instructions
Car Radio Removal Instructions
BMW Serie 7 (1994-2001 / MK 3, E38) Removing the original car radio is very easy, but before disconnecting it, ensure you have the security code, which is essential for reactivation. Wi…
Car Stereo Removal Instructions
Car Stereo Removal Instructions
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38) The car stereo is located at the bottom of the center console. To remove it, simply pull it out of its slot: start by disengaging the trim around the…
Instructions for Troubleshooting Car Radio
Instructions for Troubleshooting Car Radio
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) The audio and navigation system of the vehicle in question consists of numerous control units that communicate with each other, exchanging a lot of i…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos