Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Ignition Coil Removal Instructions

Model: BMW Serie 7 E38, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Spark plugs

See other generations:
Video tutorial

The ignition coils are integrated with the spark plug boots. To remove them, first take off the plastic cover on top of the engine (just press on the clips to release it). Then, proceed to remove the spark plug well cover by unscrewing the corresponding mounting screws.

Next, disconnect the safety latch of the connector attached to the ignition coil, unscrew the mounting bolts of the coil, and pull it out along with the boot. Then, reverse the process for installation by inserting the boot until it locks onto the spark plug, securing the coil with the corresponding bolts, and finally reconnecting the connector.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Automatic Transmission Assembly
Instructions for Removing the Automatic Transmission Assembly
BMW Serie 7 (1994-2001 / E38, MK 3) If you need to disconnect the automatic transmission from the engine and the assembly has already been removed from the vehicle, things become easier…
Instructions for Removing Engine Undercover
Instructions for Removing Engine Undercover
BMW Serie 7 (1994-2001 / E38, MK 3) Under the engine compartment, there is a plastic cover that protects the engine from splashes while driving on wet roads and also serves to shield it…
Front Door Handle Removal Instructions
Front Door Handle Removal Instructions
BMW Serie 7 (1994-2001 / E38, MK 3) To remove the outer door handle, you first need to take off the panel. After removing the mounting screws, disengage the snap fasteners along the edg…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos