Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Removing Engine Undercover

Model: BMW Serie 7 MK 3, E38 - Years 1994-2001
Part: Body

Under the engine compartment, there is a plastic cover that protects the engine from splashes while driving on wet roads and also serves to shield it from small debris. If maintenance requires access to the lower part of the engine, you must remove this cover: lift the vehicle on a hydraulic lift and unscrew the fastening screws located around the perimeter of the cover to remove it. Then, reverse the process for reinstallation, ensuring the retaining clips are in place.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 7 (2008-2015 / F01, MK 5, F02) To replace a headlight on this model, first remove the bumper. Manually detach the rubber seal, then use a special pliers to remove the clips holding…
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) To remove the rear speaker, first take off the door panel. Start by removing the two square plugs located below the wood trim covering the armrest ar…
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) To remove the climate control panel, you need to take off some elements of the dashboard: at this stage, be particularly careful not to damage (scrat…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos