Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the gear lever of a BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Shift knob

Thanks to this very short video tutorial today, you will be able to see the entire procedure necessary to change the gear shift knob of a BMW 3 Series, model E46 produced from 1998 to 2006, including the M3 version. Therefore, replacing the gear shift knob of this car is actually very simple, as shown in the video, you just need to grab the old knob and pull it decisively to remove it. Once the old knob is removed, you can replace it by inserting a new one by pressing it firmly into the gear shift lever to complete the job.

Posted on 4 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Shift Knob of the BMW 3 Series Automatic Transmission
How to Replace the Shift Knob of the BMW 3 Series Automatic Transmission
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, discover how to remove and replace the shift knob of the BMW 3 Series automatic transmission. First, get in the vehicle and pull the automatic…
How to remove the gear knob of the BMW Series 3 E90.
How to remove the gear knob of the BMW Series 3 E90.
BMW Serie 3 (2005-2013 / E91, E90, E92) To discover how to quickly and safely remove the gear knob inside your BMW 3 Series E90, simply read the following guide and follow the steps provide…
How to Replace the Shift Knob in a BMW 3 Series E90
How to Replace the Shift Knob in a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you can see how to replace the shift knob in a BMW 3 Series E90 by following some simple steps that will allow you to work in…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos