Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the shell of the BMW 3 Series remote control

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Key

Today we will discover the process that will allow us to disassemble and replace the shell of the BMW 3 Series key remote. First, we take our remote control and start by removing the physical key from inside it; then we pry on the sides and the slot created to open the remote control in two parts, consequently removing all the components we find inside (such as the electronic board and the transponder), as shown in the video. At this point, we install everything on the new key shell, assembling the remote control perfectly in order!

Posted on 14 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the key shell of the BMW 3 Series
How to change the key shell of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today's main instructions will show us the process of disassembling and replacing the key shell of the BMW 3 Series, as well as the 5 Series. First, …
How to Replace the Battery in the BMW 3 Series Remote
How to Replace the Battery in the BMW 3 Series Remote
BMW Serie 3 (2012-2019 / F30, F31) To replace the battery in the BMW 3 Series remote, press the button located at the top of the device to remove the cover and the key. Once the key is…
How to Replace the Key Fob Battery for the BMW 3 Series?
How to Replace the Key Fob Battery for the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To replace the key fob battery for the BMW 3 Series, use a thin object to pry open the groove that separates the two halves of the fob. By prying, yo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos