|
Do it yourself
| |||
| ||||
How to replace the rear headlight bulb of a BMW 5 Series?
Model: BMW Serie 5
E61, E60
- Years 2003-2010
To replace the rear headlight bulb of a BMW 5 Series, start by turning off the vehicle and ensuring that the power is disconnected to avoid short circuits. Open the trunk and locate the internal access panel, located behind the rear headlight inside the vehicle. Usually, this panel can be removed by hand or with the help of a small tool like a screwdriver. Once the panel is removed, you will have access to the headlight optical group. You will find the bulb holder inside the group. Gently rotate it counterclockwise to remove it. At this point, remove the burnt bulb from its housing, being careful not to damage the electrical contacts. Take the new bulb, which must be of the same type and wattage as the one being replaced, and insert it into the bulb holder. Reinsert the bulb holder into the optical group, rotating it clockwise until it is securely fixed. Finally, reposition the access panel and make sure it is securely closed. Once the replacement is complete, turn on the vehicle and check that the new bulb is working properly.
Posted on 17 September 2024 by ScegliAuto
Video tutorial
Related tutorials
BMW Serie 5
(2010-2017 /
F11, F10)
To learn how to properly replace the rear headlight bulb on your BMW 5 Series F10, carefully read the following guide and follow all the steps descri…
BMW Serie 5
(2003-2010 /
E61, E60)
To correctly complete the replacement of the headlight bulb on your BMW 5 Series E60 (2003-2010), follow the steps outlined in this mini guide. First…
BMW Serie 5
(2003-2010 /
E61, E60)
In this video tutorial, you will learn how to remove and replace the position bulb on a third-generation BMW 5 Series. First, open the hood and remov…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.263
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |