Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Headlight bulb

The steps to replace the left front headlight bulb of the BMW 3 Series are: - lift the vehicle; - remove the left front wheel; - remove the cover on the wheel arch; - disconnect the connector; - remove the bulb; - insert the new bulb; - connect the connector; - close the cover; - mount the wheel; - lower the vehicle. If necessary, follow the same steps to replace the right bulb. Before replacing the bulbs, it is advisable to disconnect the vehicle's battery to avoid damage to fuses or electronics.

Posted on 11 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a BMW 3 Series
How to Replace the Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the headlight bulb on a BMW 3 Series, remove the bolts securing the front wheel corresponding to the bulb you need to replace. Once the wh…
How to replace the front headlight bulb of the BMW 3 Series
How to replace the front headlight bulb of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today we will explain how to replace the headlight bulb of the BMW 3 Series model E92, produced from 2005 to 2013. To replace the bulb, we need to op…
Replacement of the front headlight bulb of the BMW 3 Series
Replacement of the front headlight bulb of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Following these simple steps, we will see how to disassemble and replace the low beam or high beam bulb of the front headlight of the BMW 3 Series. F…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos