Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front windshield wipers of the BMW 5 Series.

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Windshield wipers

The following steps will show us the process of disassembly and replacement of the front windshield wipers, but it also applies to the rear wiper, of the BMW 5 Series. First, let's move to the front and start by lifting the windshield wiper arm; then rotate the windshield wiper blade and unclip the plastic clip to remove it, as shown in the video. At this point, let's install the new windshield wipers, of the right type and size; attach it to the windshield wiper arm and replace the other windshield wiper if necessary in the same way!

Posted on 13 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the blades or wipers on the BMW 5 Series F10
How to change the blades or wipers on the BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) Let's find out in this short and simple guide how to remove and replace the front wipers or blades on the BMW 5 Series F10. First of all, let's get t…
Where is the windshield wiper relay located in the BMW 5 Series?
Where is the windshield wiper relay located in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E60, E61) The windshield wiper relay of the BMW 5 Series is located inside the designated box in the engine compartment: in order to access the box, you will n…
Where are the fuses of the BMW 5 Series located?
Where are the fuses of the BMW 5 Series located?
BMW Serie 5 (2003-2010 / E60, E61) The fuse boxes of the BMW 5 Series are responsible for containing the fuses that regulate the operation of the devices installed on the vehicle: in t…

Other guides you may be interested in

How to Remove an EGR Valve from a Land Rover Freelander

This video shows how to remove an EGR valve from a Land Rover Freelander. Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, removing the piece from the engine bay. Start unscrewing the fixing pins of the EGR valve as shown in the video. Once the piece is removed from its seat, unscrew the screws present on it with a screwdriver. Disconnect the power connectors from the valve, and remove it from the engine bay. Once the piece is removed, install the new EGR valve in the engine bay with the associated parts. Finally, reassemble the ventilation pipe in the engine bay after cleaning it of any dirt and deposits.

Watch the video!


by ScegliAuto

More videos