Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the cabin fan located in the BMW 5 Series?

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Blower motor

In this video we can see where the cabin fan is located in the BMW 5 Series and how to proceed in case we need to replace it. As shown, the fan in question is not located inside the cabin but inside the engine compartment, in front of the windshield on the passenger side. Before disassembling it, make sure the key is not inserted, then open the engine hood and remove the indicated cover, the box of various wiring and the support panel. At this point, disassemble the module containing the fan, replace it, and reassemble everything.

Posted on 28 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on a BMW 5 Series F10
Where to Find the OBD Port on a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) To locate the OBD port on your BMW 5 Series F10, follow the steps outlined in this guide. First, open the driver's door, then enter the vehicle and l…
Where are the fuses located in the BMW 5 Series?
Where are the fuses located in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) In the BMW 5 Series, the fuses are contained within the designated fuse boxes installed in the vehicle: the first is located inside the cabin, behind…
What is the fuse diagram for the BMW 5 Series?
What is the fuse diagram for the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) The fuse diagram for the BMW 5 Series F10 and F11 is detailed in the owner's manual. If this is lost, refer to the diagram shown in the attached vide…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos