Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fan Resistor on a BMW 5

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Blower motor

See other generations:
Video tutorial

Is the air fan damaged? Let's see how to remove the fan resistor on a BMW 5. Use a pry tool to remove the plastic cover under the dashboard (on the center tunnel side). Use a screwdriver to unscrew the cover (where the resistor is located).

Disconnect the power connector and remove the resistor from the cabin. Install a new fan resistor (connect the power connector).

Reinstall the cover and tighten the screws. Check that all parts are correctly installed and test the fan's operation.

Turn on the air controls of the BMW.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Blower Resistor on BMW 5 Series
How to Replace the Cabin Blower Resistor on BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Replace the blower resistor on a BMW 5 Series? Remove the cover plastics under the dashboard. Here's how to do it. Pry off the plastic under the fron…
How to Remove the Heater Resistor in the BMW 5 Series?
How to Remove the Heater Resistor in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E60, E61) In this tutorial, you will see how to remove the heater resistor in the BMW 5 Series, a very simple task to perform, for example, if you need to repl…
Disassembly and Replacement of the Cabin Fan in a BMW 5 Series
Disassembly and Replacement of the Cabin Fan in a BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Here are step-by-step instructions to disassemble and replace the cabin fan in your BMW 5 Series. First, get inside the vehicle and begin removing th…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos