Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Blower Resistor on BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Blower motor

Replace the blower resistor on a BMW 5 Series? Remove the cover plastics under the dashboard. Here's how to do it. Pry off the plastic under the front windshield, then unscrew the cover. Remove the cover drawer on the right side of the dashboard, and unscrew all the securing screws. Locate and disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new blower resistor (connect the power connector). Finally, reinstall the cover and tighten the screws. Check the proper installation of the previously mounted parts and test their correct operation. Remove all dashboard plastics to access the blower if it is damaged.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Fan Resistor on a BMW 5
Removing the Fan Resistor on a BMW 5
BMW Serie 5 (1995-2003 / E39) Is the air fan damaged? Let's see how to remove the fan resistor on a BMW 5. Use a pry tool to remove the plastic cover under the dashboard (on the c…
How to Remove the Heater Resistor in the BMW 5 Series?
How to Remove the Heater Resistor in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) In this tutorial, you will see how to remove the heater resistor in the BMW 5 Series, a very simple task to perform, for example, if you need to repl…
How to Replace the Cabin Air Filter on BMW 5 Series
How to Replace the Cabin Air Filter on BMW 5 Series
BMW Serie 5 (1995-2003 / E39) In this video tutorial, see how to replace the cabin air filter on a BMW 5 Series by following a few simple steps: First, purchase a new cabin air fi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos