Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Shift Knob on BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Shift knob

See other generations:
Video tutorial

In this video, see how to remove the shift knob on a BMW 3 Series. First, grasp the knob with both hands and pull it upward.

Then, detach the leather boot cover from the edge of the center console using a plastic trim tool. To install, take the boot and slide it onto the rod on the center console (if the boot is damaged, replace it with a new one). Next, slide on the new shift knob and rotate it until it locks into place.

Finally, attach the clips of the leather boot to the center console.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Replace the Shift Knob on a BMW 3 Series
How to Replace the Shift Knob on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you can start, sit in the driver's seat of your BMW 3 Series. Begin by grasping the shift knob with both hands. At this point, pull firmly tow…
Replace Shift Knob on BMW 3 Series
Replace Shift Knob on BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Remove the damaged shift knob from a BMW 3 Series. Take the knob in your hands and rotate it left and right until you remove it from the shift lever.…
How to Remove the Shift Boot and Knob on BMW 3 Series
How to Remove the Shift Boot and Knob on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Do you want to replace the shift knob on your BMW 5 Series? Let's see how to perform the removal: first, grasp the knob with both hands and pull it u…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos