Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the door handle of the BMW X3?

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Handle

This video explains, in a short time, how to disassemble the door handle of a BMW X3. Problems could arise with the aforementioned handle, due to the passage of time and the presence of dirt build-up to be removed, breakage of one or more connecting rods, and so on. What is needed to carry out the work? Simply a Torx screwdriver of the appropriate size and nothing else, in fact after unscrewing and removing the first mentioned screw, avoiding pulling the handle in the meantime, it will be sufficient to pull it outwards and then proceed with replacement, revision, and so on.

Posted on 20 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Handle of a BMW X3
How to Remove the Door Handle of a BMW X3
BMW X3 (2010-2017 / MK 2, F25) Is the door handle due for replacement? Let's see how to remove the door handle on a BMW X3. Use a lever to pry off the plastic covers inside the han…
Remove the Door Panel of the BMW X3
Remove the Door Panel of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) How to remove the rear door panel of the BMW X3? Let's see how to take it off the door. Use a trim tool to pry up the plastic covering of the handle …
How to Remove the Outer Door Handle on a BMW X3
How to Remove the Outer Door Handle on a BMW X3
BMW X3 (2010-2017 / MK 2, F25) In this brief guide, follow the procedure to remove and replace the outer door handle on a BMW X3. First, open the front or rear door and start by re…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos