Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the intercooler sleeve of the BMW 3 Series 320i.

Model: BMW Serie 3 F31, F30 - Years 2012-2019

In this guide we will see the main instructions that will allow us to disassemble and replace the intercooler sleeve of the BMW 3 Series, in the 320i or 328i version. First of all, open the hood of the car and start removing the plastic cover located on the top; then disconnect the throttle body sleeve, as shown in the video. At this point, lift the car and unscrew the screws of the lower protection, in order to remove it; now disconnect the intercooler sleeve from the bottom, replacing it with the new original one, following the video tutorial until the end!

Posted on 28 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the wheel with the spare one on the BMW 3 Series 320i
How to replace the wheel with the spare one on the BMW 3 Series 320i
BMW Serie 3 (1998-2006 / E46) In this guide we will see the procedure for disassembling and replacing the wheel with the spare wheel of the BMW 3 Series 320i. First of all, we ope…
How to replace the headlight bulb on the BMW 3 Series 320i
BMW Serie 3 (2012-2019 / F31, F30) If you own a BMW 3 Series 320i (year 2012-2019) and want to replace the headlight bulb yourself, all you have to do is put into practice the instruct…
Disassembly of the timing chain BMW 3 Series 320i
Disassembly of the timing chain BMW 3 Series 320i
BMW Serie 3 (2012-2019 / F31, F30) In this video tutorial we will see how to remove the timing chain of a BMW 3 Series E90 320i, petrol model. First we open the engine hood and remove …

Other guides you may be interested in

How to Install an Additional Horn on a Fiat Punto

It may happen that the original horn starts to produce a sound that is noticeably underwhelming; at this point, you can decide to install a pair of sounders connected in parallel with the original one to achieve a more assertive sound. The installation is very easy, but it is important to direct the sound output towards an air intake, so you need to shape a support bracket to fix it to the slam panel with a single bolt. Once secured, take the positive power from the fuse box using a 2.5 mm² cable, tapping into the purple wire directly under the relay while connecting the ground directly to the negative terminal of the battery.

Watch the video!


by ScegliAuto

More videos