Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the door of the BMW X5 with the physical key

Model: BMW X5 F15 - Years 2013-2018
Part: Key

If the key of your BMW X5 suddenly stops working and you can't unlock the doors, don't worry because thanks to the procedure described below you will be able to open any door without any problem. First of all, pull up the metal upper part of the remote control to completely remove the physical emergency key. Once you have done this, insert the physical key into the small slot located in the lower area of the handle and remove the plastic cover. Finally, locate the lock and insert the key into it to open the door.

Posted on 28 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Trunk Lid on BMW X5
How to Open the Trunk Lid on BMW X5
BMW X5 (2007-2013 / E70) Let's see how to open the automatic rear trunk lid on the BMW X5: take the key fob with the opening buttons and press the trunk release button on the…
How to Replace the Key Fob Battery for the BMW X5
How to Replace the Key Fob Battery for the BMW X5
BMW X5 (2007-2013 / E70) Easily and quickly, follow these steps to disassemble and replace the battery in the key fob for the BMW X5. First, take your key fob and remove the …
How to Replace the Key Fob Battery for BMW X5
How to Replace the Key Fob Battery for BMW X5
BMW X5 (2013-2018 / F15) In a few simple steps, we will see how to replace the battery in the key fob for the BMW X5. First, take your key fob and remove the physical key fro…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos