Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Handle on BMW X5

Model: BMW X5 E53 - Years 1999-2006
Part: Handle

Is the door handle on your BMW X5 due for replacement? Here’s how to remove it. Remove the door panel (unscrew all the retaining screws). Peel back the adhesive cover to access the door opening handle; remove the door handle, unscrew the retaining screws of the cylinder, then the screws of the handle. Install the new handle onto the door sheet metal and prepare to reassemble all the previously removed parts. Close the door with the adhesive panel, then install the plastic cover panel along with the retaining screws.

Updated on 16 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Handle on BMW X5
How to Remove the Handle on BMW X5
BMW X5 (1999-2006 / E53) How to remove and replace the door handle on a BMW X5? Use a screwdriver to remove the screws located in the door as shown in the video. Then, discon…
How to Replace the Interior Handle on a BMW X5
How to Replace the Interior Handle on a BMW X5
BMW X5 (2007-2013 / E70) How do you replace the damaged leather interior door handle on a BMW X5? Use a pry tool to remove the plastic cover above the interior handle, then u…
How to Replace the Outer Handle of a BMW X5
How to Replace the Outer Handle of a BMW X5
BMW X5 (2007-2013 / E70) To remove the outer handle of the BMW X5, open the door and locate a hole at the end of the outer handle. Inside this hole, there will be a hex screw…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos