Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Outer Handle of a BMW X5

Model: BMW X5 E70 - Years 2007-2013
Part: Handle

To remove the outer handle of the BMW X5, open the door and locate a hole at the end of the outer handle. Inside this hole, there will be a hex screw that needs to be loosened to remove the smaller part of the outer handle; this part must also be disconnected from its connector. Then, you can remove the actual handle. To do this, grasp it and pull it to the right: once moved to the right, disengage the two pins, sliding it out of its housing and disconnecting the connector.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW X5 (2007-2013 / E70) How do you replace the damaged leather interior door handle on a BMW X5? Use a pry tool to remove the plastic cover above the interior handle, then u…
BMW X5 (1999-2006 / E53) Is the door handle on your BMW X5 due for replacement? Here’s how to remove it. Remove the door panel (unscrew all the retaining screws). Peel back t…
BMW X5 (1999-2006 / E53) How to remove and replace the door handle on a BMW X5? Use a screwdriver to remove the screws located in the door as shown in the video. Then, discon…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos