Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 1
  6. : How to remove the mask on BMW 1 Series

BMW Serie 1 - Video tutorial

Model: BMW Serie 1 MK 1, E87, E81, E82 - Years 2004-2013
Part: Mask
Operation: How to remove the mask on BMW 1 Series

Let's see in this video how to remove the central grille placed on the front bumper of a BMW 1 Series. Let's get ready to unclip the bumper at the top, remove the plastic grille frame on the two parts of the bumper with a special plastic lever and screwdriver. Let's go and pry between the frame and the bumper until the plastic parts on the inside are released). Once the plastic has been released, remove the grille from the bumper and mount a new one. We reassemble the grille in the car's bumper by pressing on it until it locks into the bumper. We check the correct assembly of the parts.


Posted on 18 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos