Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the BMW X5 E70

Model: BMW X5 E70 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

In this article we will see how to replace the cabin air filter of the BMW X5 E70. In addition to the new filter, for this procedure you will need a 13 mm socket wrench. First, you need to open the hood and secure it with the appropriate locking rod. Once the hood is locked, you need to remove the fixing bolts of the cover located almost below the glass on the passenger side.

Once the 3 fixing bolts are removed, remove the cover. Once the cover is removed, use the socket wrench to remove the 3 fixing bolts of the air filter block.

Once the bolts are removed, remove the block. At this point, you will have access to the filters and can replace them.

Once replaced, put them back in the appropriate housing and secure the previously removed bolts.


Posted on 10 March 2025 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a BMW X5 E70
How to Replace the Cabin Air Filter on a BMW X5 E70
BMW X5 (2007-2013 / E70) The cabin air filter in your 2007-2013 BMW X5 E70 should be replaced periodically to maintain the air quality while using the air conditioning. Below…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
BMW X5 (2007-2013 / E70) To replace the cabin air filter, access it from the engine compartment as it is located beneath the plastic cover just below the windshield. Open the…
How to replace the fan motor of the BMW X5 E70
How to replace the fan motor of the BMW X5 E70
BMW X5 (2007-2013 / E70) In this video, we can see how to change the fan motor of the BMW X5 E70, which is located in the terminal part of the passenger side footwell: we wil…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos