Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you turn off the central display of the BMW X1?

Model: BMW X1 U11 - Years 2022-2026
Part: Checks and maintenance

In order to turn off the central display of the BMW X1, you will need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is turned on, you can navigate the central screen using the touch screen commands. You will need to lower the drop-down menu on the screen by swiping it down with the touch command from top to bottom: then you can select the "Display off" option. This way, the screen will automatically turn off and will be turned back on when the car is started again.

Posted on 30 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Screen on the BMW X1
How to Remove and Replace the Screen on the BMW X1
BMW X1 (2015-2022 / F48) In this video tutorial, you will find instructions to help you remove and replace the display or central screen of the BMW X1. First, get inside the …
How to reset the service indicator of the 2014 BMW X1
How to reset the service indicator of the 2014 BMW X1
BMW X1 (2009-2015 / E84) To correctly complete the manual reset of the service light on your BMW X1 (2014), you must follow the steps described in the following guide. First,…
How to reset the tire pressure sensor on a BMW X1
How to reset the tire pressure sensor on a BMW X1
BMW X1 (2015-2022 / F48) The video tutorial in question shows you how to reset the tire pressure warning light in a BMW X1. Get into the vehicle, turn on the instrument panel…

    Frequently Asked Questions

    • X1 2023-2030 - Where is the spare wheel on the BMW X1 located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos