Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

Today we will explain how to remove the front right door panel on a BMW 3 Series E92 model car. To perform this simple operation, we need to open the door and then remove the central cover of the door in order to access the screws that hold the panel in place.

We then unscrew the central screws and move on to removing the side screws.

Using a plastic tool, we apply slight pressure that will allow us to remove the panel without damaging the connector; we then disconnect the central connector and remove the panel completely.


Posted on 25 May 2025 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a BMW 3 Series
How to Remove the Door Panel of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you start, open the door of your BMW 3 Series. Begin by prying and removing the inserts from the door panel, using a thin but sturdy tool. Nex…
How to Remove the Door Panel of a BMW 3 Series?
How to Remove the Door Panel of a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you begin, open the door of your BMW 3 Series. Start by prying and removing the inserts from the door panel using a thin but sturdy tool. Once…
How to Remove the Door Panel of the BMW 3 Series
How to Remove the Door Panel of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today's steps will show you the procedure for removing and replacing the front door panel of the BMW 3 Series. First, open the front door of the vehi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos