Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield washer pump of the BMW 4 Series

Model: BMW Serie 4 F32, F36, MK 1, F33 - Years 2013-2020
Part: Pump

These short and simple steps will allow us to disassemble and replace the windshield washer pump of the BMW 4 Series. First, we lift the car and start by removing the right front wheel and the fender; then we will find the windshield washer pump inside, where we will disconnect the fluid tubing and the electrical connector, as shown in the video. At this point, we remove and replace the windshield washer pump with the new one, as well as with the original one; we connect the tubing and test its operation, then reassemble the fender and the front wheel!

Posted on 22 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the BMW 4 Series?
Where are the fuses located in the BMW 4 Series?
BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) The fuses of the BMW 4 Series are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be pos…
How to Replace the Key Battery in a BMW 4 Series
How to Replace the Key Battery in a BMW 4 Series
BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) To correctly and safely replace the button battery inside your BMW 4 Series key, simply follow this quick procedure. First, pull out the bottom part …
Where is the OBD port located on the BMW 4 Series 2022?
Where is the OBD port located on the BMW 4 Series 2022?
BMW Serie 4 (2020-2026 / G22, G23, G26, MK 2) If you own a 2022 BMW 4 Series and want to find the OBD port located inside the cabin, all you have to do is read the following guide and follow all …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos