Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the brake wear indicator light on the BMW X2?

Model: BMW X2 F39 - Years 2017-2023
Part: Warning light – error code

From the instrument panel of the BMW X2, you can reset the brake wear indicator by activating the instrument panel, inserting the appropriate key into the ignition switch: once the panel is activated, you can hold down the button located to the left of the instrument panel until the icon of the car with the brake wear indicator is displayed. Now, the button must be released at first and then held down again for a few seconds: when the indications regarding the replacement of the brake pads turn green, the button can be released.

Posted on 4 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the brake service on the BMW X2?
How to reset the brake service on the BMW X2?
BMW X2 (2017-2023 / F39) In this tutorial, we will see how to reset the brake service on the BMW X2, a very simple and quick operation that should be done only after completi…
How do you reset the Service light on the BMW X2?
How do you reset the Service light on the BMW X2?
BMW X2 (2017-2023 / F39) To reset the Service light of the BMW X2, you need to turn on the instrument panel by inserting the key into the ignition: at this point, you can pre…
How to Reset the Service Light on the BMW X2
How to Reset the Service Light on the BMW X2
BMW X2 (2017-2023 / F39) Turn on the instrument cluster of the BMW X2 to reset the service light related to the vehicle maintenance. From the onboard computer, select the "Ve…

Other guides you may be interested in

How to Replace the Tailgate Struts on a Citroen C5

Is the tailgate of your car extremely heavy? The gas struts are likely worn out. In this video, see how to fix the pressure loss of the struts on a Citroen C5 tailgate. Lift the tailgate and secure it. Using a screwdriver, remove the retaining clips at both ends of the strut. Disconnect the worn strut and fit the new part into the two mounts. Secure the strut with the metal clips. Repeat the same process for the removal/installation of the other strut. Test the correct operation of the replaced struts.

Watch the video!


by ScegliAuto

More videos