Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear brake pads of the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake pads

See other generations:
Video tutorial

In order to replace the rear brake pads of the BMW 3 Series, first you will need to lift the car to ensure that the corresponding wheel is removed from its hub: once the wheel has been removed, it will be possible to locate the screws that secure the corresponding brake caliper to loosen them and detach the caliper in question.

At this point, it will be possible to remove the pin that holds the pads to remove them and replace them with new ones: once these are inserted, the caliper can be reattached and the wheel can be reinserted.


Posted on 2 October 2025 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a BMW 3 Series
How to Replace the Front Brake Pads on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) To replace the front brake pads on a BMW 3 Series, first lift the vehicle to remove the wheel. The wheel can be taken off after loosening its mountin…
How to Change the Brake Discs and Pads on a BMW 3 Series F30
How to Change the Brake Discs and Pads on a BMW 3 Series F30
BMW Serie 3 (2012-2019 / F31, F30) In today's tutorial video, you will see how to disassemble and replace the front brake discs and pads on a BMW 3 Series F30 and F31, following the in…
Remove the Brake Rotor on BMW 3
Remove the Brake Rotor on BMW 3
BMW Serie 3 (2005-2013 / E92, E90, E91) Removing the brake rotor from the BMW 3? Let's see how to take it off from above the wheel hub. Raise the vehicle to a comfortable height to work on …

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos