Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Panel of a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

Remove the rear door panel (left side) on a BMW 3 Series: disconnect the battery terminals, use a screwdriver to remove the screws located in the upper lever area of the door opening and the screws in the handle (after removing the plastic cover). Remove the remaining screws on the door panel and detach the retaining clips.

Finally, pull off the panel and disconnect it from the door (unplug the power wiring and the opening cable). Perform the desired maintenance inside the door and reassemble everything.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to disassemble the rear tailgate panel of the BMW 3 Series
How to disassemble the rear tailgate panel of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) In this guide we will see the instructions that will allow us to disassemble and replace the rear tailgate panel of the BMW 3 Series. First of all, w…
Removing the Rear Headlight of a BMW 3 Series
Removing the Rear Headlight of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) How do you remove the rear headlight of a BMW? Let's look at removing the rear headlight of a BMW 3 Series. Lift the trunk of the car and secure it. …
How to disassemble the rear door panel of the BMW 3 Series
How to disassemble the rear door panel of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) The information provided in this guide will show us how to disassemble the rear door panel of the BMW 3 Series, in simple and quick steps. First, we …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos