Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to remove the mirror from the BMW 3 Series mirror

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Outside rearview mirror
Operation: How to remove the mirror from the BMW 3 Series mirror

Let's see how to remove the exterior mirror mirror on BMW 3 Series. With a lever with plastic or rubber coating: let's pry between the perimeter of the mirror frame and the mirror glass of the same. We pry until the plastics come off the mirror (we disconnect the power cable); very delicate operation because the slide or the mirror itself could break. We unscrew the screws with a screwdriver to disconnect the mirror cover, replace the damaged piece with the new one. We are careful to engage the plastic snap clips in the mirror supports upon reassembly.


Posted on 9 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - How do you replace the glass of the rearview mirror of the BMW 3 Series? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos