Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of the BMW 320D E46

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Door trim panel

In the following article, we will show you how to remove the door panel of the BMW 320D E46. For this operation, you will need a Phillips screwdriver and a flathead screwdriver or the appropriate tool for plastics. First, you need to remove the cover located behind the opening handle; once removed, take off the plastic on the panel with the AIRBAG label. After removing that, take out the screw located behind the two covers you just removed. After removing the two screws, take out the two screws located at the lower ends of the door handle. Once these screws are removed, pry along the edges with the appropriate tool or the flathead screwdriver and pull outward to remove the panel. Be careful as there are wiring connections; so, remove the panel, disconnect the wiring, and then completely remove the panel.

Posted on 26 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock on the BMW 320D E46
How to set the clock on the BMW 320D E46
BMW Serie 3 (1998-2006 / E46) In today's article, we will show you how to adjust the clock on the instrument panel of the BMW 320D E46. The procedure takes little time to be carri…
How do you reset the odometer of the 1999 BMW 320d E46, after changing the engine oil?
How do you reset the odometer of the 1999 BMW 320d E46, after changing the engine oil?
BMW Serie 3 (1998-2006 / E46) It is time to change the engine oil of our BMW E46 320d, after covering the mileage specified in the last service, or because a certain amount of tim…
Removing the Starter Motor on the BMW 3 Series E46 320D
BMW Serie 3 (1998-2006 / E46) Today, you will learn how to remove the starter motor on the BMW 3 Series E46 320D by following the instructions below. First, open the hood and remo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos