Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the BMW 5 Series G30

Model: BMW Serie 5 G30 - Years 2017-2024
Part: Service warning light

In this video, see how to reset the service light on the BMW 5 Series G30. First, ensure that the doors, trunk, and hood are securely closed. Then, turn on the instrument cluster without starting the engine. Press and hold the onboard computer selection button located on the left side of the dashboard, below the fuel level gauge. After about ten seconds, the first service item will appear. Press the button repeatedly to scroll through the list and select the necessary reset item. Press and hold the selection button for about three seconds until the display shows "reset." Press and hold the button again for three seconds. Reset completed.

Posted on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the BMW 5 Series G30
How to Replace the Key Battery of the BMW 5 Series G30
BMW Serie 5 (2017-2024 / G30) Replacing the button battery inside your BMW 5 Series G30 key is very simple, and with the instructions in this guide, you will complete the entire o…
Replacing the Rear Brake Pads on the BMW 5 Series G30
Replacing the Rear Brake Pads on the BMW 5 Series G30
BMW Serie 5 (2017-2024 / G30) In this video tutorial, you will see the steps to remove and replace the rear brake pads and reset the brake warning light on the BMW 5 Series G30. F…
Where is the fuse box located in the BMW 5 Series G30 2018?
Where is the fuse box located in the BMW 5 Series G30 2018?
BMW Serie 5 (2017-2024 / G30) In this new mini guide, we will discover together where the box containing all the fuses of your 2018 BMW 5 Series G30 is located. To eliminate any p…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos