Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the onboard computer display in the BMW 5 Series?

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Onboard computer

In this tutorial we can see how to replace the onboard computer display in the BMW 5 Series, an extremely simple and fast operation. First of all, make sure that the key is not inserted, so that you can operate safely, then grab the entire dashboard trim, pull it towards you and unclip it. Next, locate the two fixing screws of the display, unscrew them using a Torx T20 key and remove the display itself from the support. At this point, all that remains is to disconnect the internal connector and install the replacement following the reverse procedure.

Posted on 4 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of Central Display on BMW 5 Series E90-E91-E92
Disassembly of Central Display on BMW 5 Series E90-E91-E92
BMW Serie 5 (2003-2010 / E61, E60) In this video tutorial, you will see the instructions for disassembling the central display of the onboard computer on a BMW 5 Series E91, as well as…
Setting the Time on BMW 5 Series
Setting the Time on BMW 5 Series
BMW Serie 5 (2017-2024 / G30) Get in the car and turn on the ignition without starting the engine (this should not be necessary). Once the onboard computer is on, use the joystick…
Battery Problem Diagnostics
Battery Problem Diagnostics
BMW Serie 5 (1995-2003 / E39) This video shows how to check for potential issues related to the battery warning light on a BMW 5 Series. These operations are performed using the o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos