Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Setting the Time on BMW 5 Series

Model: BMW Serie 5 G30 - Years 2017-2024
Part: Clock

Get in the car and turn on the ignition without starting the engine (this should not be necessary). Once the onboard computer is on, use the joystick on the center console to navigate to the section you are looking for. Scroll through the various menu sections to enter the display settings, then to the time. Here, you can easily increase or decrease the hour and minute values. This is the method to check and modify many settings of the instrument cluster, the onboard computer, and more. It is a very simple operation that anyone can perform.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the date and time on the BMW 5 Series
How to set the date and time on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Below we will see the instructions that will allow us to change the time and date on the central display of the BMW 5 Series. First of all, we get in…
How to Set the Time in a BMW 5 Series?
How to Set the Time in a BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) In this tutorial, you will learn how to set the time in a BMW 5 Series, a very simple and quick operation to perform after disconnecting the battery …
How to Reset the Tire Light on a BMW 5 Series?
How to Reset the Tire Light on a BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) In this tutorial, you will see how to reset the tire light on a BMW 5 Series, a very simple and quick operation. Before proceeding, ensure you have r…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos