Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads on a BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on a BMW 1 Series, park the vehicle on a flat surface, loosen the wheel bolts, and safely lift the car. Remove the wheel to access the braking system. Locate the brake caliper and disconnect the wear sensor if present.

Remove the springs and caliper retaining pins, then unscrew the necessary support screws and move the caliper without straining the brake line. Extract the old pads and clean the mounting seat thoroughly.

Using a special tool, retract the caliper piston to create space for the new pads. Install the new pads in their correct position and reassemble the caliper with all previously removed fastening elements.

Reconnect the wear sensor if present, and remount the wheel. Repeat the procedure on the opposite side.

Finally, press the brake pedal several times to reposition the pistons and check the correct functioning of the system before using the vehicle.


Posted on 24 June 2026 by ScegliAuto


Related tutorials

BMW 1 Series Brake Pad Wear Warning Reset
BMW 1 Series Brake Pad Wear Warning Reset
BMW Serie 1 (2011-2019 / F21, MK 2, F20) It’s time to replace the brake pads; your 1 Series will alert you via the display on the instrument cluster. Remember that in addition to the pads, y…
Replacing the Rear Brake Pads on the BMW 1 Series
Replacing the Rear Brake Pads on the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today, you will see the procedure necessary for removing and replacing the rear brake pads on the BMW 1 Series, including the coupe version. First, l…
How to Reset the Brake Wear Light on a BMW 1 Series?
How to Reset the Brake Wear Light on a BMW 1 Series?
BMW Serie 1 (2011-2019 / F21, MK 2, F20) To reset the brake pad wear light on a BMW 1 Series, press and hold the button located at the bottom left of the instrument cluster: keep it pressed …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos