|
Do it yourself
| |||
| ||||
How to Replace the Rear Camera Handle on a BMW X3
Model: BMW X3
F25, MK 2
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
Let's see how to replace the rear hatch switch on a BMW X3. It is essential to order the correct replacement part: the YouTuber ordered the handle without the hole for the rear camera and had to modify it. If we order the right part, there is no need to do all the work he did to drill the piece. For example, the EAN code 4255661805679 on auto-doc.it at the price of $22.99. Open the hatch, unscrew the two screws located inside the handle compartment, and detach it starting from the sides: below we will see the wiper mechanism, and beneath it, the handle to be replaced. Pull out the handle, remove the camera, disconnect the electrical connector, and reinstall the camera in the new assembly (which we will have purchased correctly). Reconnect the connector and reassemble the panel. Test the camera's operation, and you're done.
Posted on 23 October 2026 by ScegliAuto
Related tutorials
BMW X3
(2010-2017 /
F25, MK 2)
In this video, see how to install a camera on the rear hatch of a BMW X3. First, open the rear hatch of the vehicle. Then, remove the interior trim f…
BMW X3
(2010-2017 /
F25, MK 2)
In this brief guide, follow the procedure to remove and replace the outer door handle on a BMW X3. First, open the front or rear door and start by re…
BMW X3
(2010-2017 /
F25, MK 2)
Is the door handle due for replacement? Let's see how to remove the door handle on a BMW X3. Use a lever to pry off the plastic covers inside the han…
Other guides you may be interested in |
How to Replace the External Door Handle on a Renault Master
Today's instructions will show you the procedure for removing and replacing the external door handle on the front door of the Renault Master. First, open the front door and start removing the door panel by unscrewing all the fixing screws; then unscrew the handle screws, pulling it out from the outside as shown in the video. At this point, install the new external handle, as well as the original one, checking its proper operation; finally, reassemble the door panel, following the video until the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |