Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the BMW 5 Series?

Model: BMW Serie 5 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Battery

See other generations:
Video tutorial

To replace the battery in the BMW 5 Series, open the trunk to access the components inside the compartment. Once the covering panel is removed, you will locate the battery underneath.

It must be freed from the securing screws and the appropriate power cables. This way, you can proceed by inserting the new device and connecting it. After covering everything with the panel, check that everything functions correctly after the replacement.


Posted on 13 November 2026 by ScegliAuto


Related tutorials

How to Change the Battery on a BMW 5 Series
How to Change the Battery on a BMW 5 Series
BMW Serie 5 (1995-2003 / E39) How do you change the battery on a BMW 5 Series? Let's see where the battery is located and how to remove it. Open the trunk of the car (on the BMW, …
How to Replace the Remote Battery for the BMW 5 Series?
How to Replace the Remote Battery for the BMW 5 Series?
BMW Serie 5 (2017-2024 / G30) To replace the remote battery for the BMW 5 Series, press the button located on the bottom of the device to slide the key out of its housing. Once th…
How to Replace the Battery in a BMW 5 Series Remote?
How to Replace the Battery in a BMW 5 Series Remote?
BMW Serie 5 (2003-2010 / E60, E61) To replace the battery in a BMW 5 Series remote, slide the key out from the top of the device to gain access to its housing. This will allow you to a…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos