Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the rear seats of a BMW 3 Series

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Seat

We see the disassembly of the rear seats of a BMW 5 Series. We disassemble the seat of the rear seat (we remove the seat with our hands) until it is completely detached from the bottom of the car. After removing the seat backrests, remove the metal guides at the two ends of the backrest (if present on this model), help us with plastic or metal levers to facilitate removal. We detach a part of the seat from the sheet of the car if divided (the same operation is carried out on the other half of the backrest). We assemble the new rear seats by proceeding backwards with the operations.

Posted on 19 March 2020 by ScegliAuto

Video tutorial

Related tutorials

How do you fold down the rear seats of the BMW 5 Series?
How do you fold down the rear seats of the BMW 5 Series?
BMW Serie 5 (1995-2003 / E39) The procedure for folding down the rear seats of the BMW 5 Series involves pulling the black levers located next to the two outer headrests of the re…
How do you fold down the rear seats of the BMW 5 Series?
How do you fold down the rear seats of the BMW 5 Series?
BMW Serie 5 (1995-2003 / E39) In order to fold down the rear seats of the BMW 5 Series, you need to pull the black levers located right next to the two outer headrests of the rear…
How to disassemble the rear window of the BMW 5 Series
How to disassemble the rear window of the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Today we will discover the main instructions on how to disassemble and replace the rear windshield of the BMW 5 Series. First, we open the rear tailg…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos