Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Power Steering Fluid and Filter

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Power steering fluid

See other generations:
Video tutorial

If the power steering fluid is contaminated, it needs to be replaced. The materials required for the job include a new filter, special fluid, some tools, and a syringe.

To prevent fluid from spilling into the alternator, place a pan and some rags under the filter. Open the oil reservoir cap and use the syringe to draw out the fluid, pouring it into the pan. Once all the fluid is removed, close the reservoir and remove the filter by unscrewing the bolts at the base, then remove the two hose clamps to disconnect the two hoses attached to it. Position the pan to catch any fluid from the filter and hoses, and clean up any oil residue.

Remove the support bracket from the old filter and attach it to the new one, which should be positioned in its place after reconnecting the hoses. Top off with the appropriate new fluid.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacing the Power Steering Reservoir Cap Seal
Replacing the Power Steering Reservoir Cap Seal
BMW Serie 5 (1995-2003 / E39) If you notice oil leaks around the power steering reservoir cap, the underlying seal may be damaged: it is an o-ring made of rubber that, due to the …
How to Bleed the Power Steering Pump
How to Bleed the Power Steering Pump
BMW Serie 5 (1995-2003 / E39) A properly functioning power steering system can make the difference between having an accident or not. Power steering provides an advantage when it …
When to Change Power Steering Fluid
When to Change Power Steering Fluid
BMW Serie 5 (1995-2003 / E39) Cars equipped with power steering have a reservoir that contains the fluid needed to lubricate the gears. If the car consumes too much fluid, it can …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos