Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlamp Bulb on BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
This video is currently unavailable

Replace the blown bulbs mounted in the front headlamp of a BMW 1 Series. Open and lift the front headlamp, securing it in place.

Access the front headlamp located in the engine bay. After removing the cover that protects the headlamp, remove the damaged bulb and fit a new one (same size and voltage). Replace all damaged bulbs.

Refit the plastic cover behind the front headlamp. Test the correct operation of the new bulbs.

Turn on the controls and check the operation of the bulbs.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Replacing Headlamp Bulb on BMW 1 Series
Replacing Headlamp Bulb on BMW 1 Series
BMW Serie 1 (2011-2019 / F21, MK 2, F20) In this video tutorial, you will learn how to replace the front headlamp bulb on a BMW 1 Series. First, you may want to remove the wheel on the affec…
Where is the fuse box located on a 2011 BMW 1 Series?
Where is the fuse box located on a 2011 BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) The 2011 BMW 1 Series does not have a fuse box in the engine compartment. This is because all the fuses for this model are contained within a single …
How to Open the Bonnet of a BMW 1 Series
How to Open the Bonnet of a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Before you start, sit in the driver's seat of your BMW 1 Series. Begin by pulling the bonnet release lever located at the bottom right of the driver'…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos