Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlamp Bulb on BMW 1 Series

Model: BMW Serie 1 F21, MK 2, F20 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

In this video tutorial, you will learn how to replace the front headlamp bulb on a BMW 1 Series. First, you may want to remove the wheel on the affected side for easier access: alternatively, turn the wheel fully to one side to gain access.

Then, remove the cover in the wheel arch and unscrew the plastic protection cap for the bulbs. At this point, extract the entire bulb and release the clips to remove it (you may need a screwdriver to assist).

The bulb in question is a halogen type with an H7 fitting.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlamp Bulb on the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today, you will learn how to remove and replace the front headlamp bulb on the BMW 1 Series. First, lift the bonnet of your car and start by removing…
How to Change the Front Headlamp Bulb of the BMW 1 Series F20
How to Change the Front Headlamp Bulb of the BMW 1 Series F20
BMW Serie 1 (2011-2019 / F21, MK 2, F20) In this guide, you will learn how to correctly and quickly replace the front headlamp bulb of your BMW 1 Series F20 (2011-2019). First, park the car …
Replacing Front Headlamp Bulb on BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Replace the blown bulbs mounted in the front headlamp of a BMW 1 Series. Open and lift the front headlamp, securing it in place. Access the front hea…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos