Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat on BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Seat

See other generations:
Video tutorial

Want to replace the front seat in your car? Here's how to remove it on a BMW 3 Series. Move the seat back (using the electric buttons if available) and raise the seat cushion.

Then, remove the screw covers. Use a socket wrench to remove the mounting screws located on the front rail.

Move the seat forward using the adjustment buttons and remove the mounting pins from the rear of the rail. Disconnect the front seat power connectors.

To install the new seat, tighten the screws, secure the screw covers, and reconnect the power connectors.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to disassemble the front seat of the BMW 3 Series
How to disassemble the front seat of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, we will see the instructions that will allow us to disassemble and eventually replace the front seat of the BMW 3 Series. First, we op…
Remove the Front Seat of BMW E46
Remove the Front Seat of BMW E46
BMW Serie 3 (1998-2006 / E46) Want to remove the front seat of a BMW 3 Series? Here’s how to take it out from inside the cabin. Move the seat back (using the electric buttons if a…
How to Remove the Front Seat of the BMW 3 Series
How to Remove the Front Seat of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This guide shows you how to remove and replace the front seat of the BMW 3 Series, following the instructions below. First, open the front door and s…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos