Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Headlight Bulb on BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight bulb

Is the headlight of your BMW 3 Series burned out? Here’s how to change the bulb inside the headlight. Remove the front wheel, then use a screwdriver to take off the plastic cover at the bottom of the splash shield to access the headlight located in the bumper. After removing the protective cap, take out the damaged bulb and install a new one (same size and voltage). Reinstall the plastic cover under the car's bumper. Perform this replacement on both the front and rear headlights to ensure consistent lighting. Test the lights by turning on the switches.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the BMW 3 Series?
How do you replace the headlight bulb of the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In order to replace the headlight bulb of the BMW 3 Series, you need to open the hood so that you can access the inside of the corresponding headligh…
How to Replace the Headlight Bulb on a BMW 3 Series?
How to Replace the Headlight Bulb on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the headlight bulb on a BMW 3 Series, loosen the screws that secure the panel located in the wheel well corresponding to the bulb to be re…
How to Replace the Headlight Bulb on a BMW 3 Series
How to Replace the Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the headlight bulb on a BMW 3 Series, remove the bolts securing the front wheel corresponding to the bulb you need to replace. Once the wh…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos